Cart
The robotic arm is rotating multiple-dimensional, in front crawl the elongation distance of robotic arm is range from 50mm to 450mm (1.97" to 17.72"). The torque force of a single servo is up to 30KG, and the load capacity of bottom joint is up to 500g.
We provide assembling video in order to make it easier to assemble the robotic arm.
As for hardware we still provide Upgrade component to make the robotic arm more high-performance. The roating platform brings more stabilization and precision to the arm, the drive board makes it more convenient to control the arm, you do not need Dupont Line any more, just insert the servo into the shield and control your arm to do any job as you want.
Board & Controller:
| Microcontroller | ATmega2560 |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7-12V |
| Input Voltage (limits) | 6-20V |
| Digital I/O Pins | 54 (of which 15 provide PWM output) |
| Analog Input Pins | 16 |
| DC Current per I/O Pin | 40 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 256 KB of which 8 KB used by bootloader |
| SRAM | 8 KB |
| EEPROM | 4 KB |
| Clock Speed | 16 MHz |
A 3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital Motion Processor.
Easy to get it fit into your project!
Frame & Servo Kit
NOTE: Controller boards and rotatable platform are NOT included.
